Beginner's Guide to Installing a New Shower Unit

Beginner's Guide to Installing a New Shower Unit

Blog Article

Give Me A Quote!

Just how do you really feel with regards to How to Install a Shower Enclosure ?

A successful shower installment needs cautious preparation as well as a lot of work. In many cases, you will require to do 3 types of jobs: framing wall surfaces, installing the plumbing, and also ending up wall surfaces.

Prep work

Firstly, you have to pick the kind of shower that you desire to set up. It is necessary to establish whether the chosen shower is capable of dealing with specific systems and also can manage a secure level of water through the central heating boiler. Many shower devices nowadays are made to be flexible to various water stress (such as saved hot water and cold mains).
It is likewise crucial to take into consideration the water stress and the planning of the piping and drain for the shower

Different Sorts Of Shower Units

Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower unit can be connected to the bathroom faucet based on your demand, as well as the water temperature level can be adjusted via the faucets. Push-on mixers are cheap as well as incredibly straightforward to set up. Nonetheless, although the tube connection is easy, it is conveniently removed. Furthermore, it is inconvenient to readjust the temperature.

Bath/Shower Mixer: The hose pipe as well as spray of this sort of shower are incorporated with a bathroom mixer tap, as well as the temperature level can be adjusted through the bath faucets. It is a very economical alternative and no added plumbing is entailed. However, the bath/shower mixers likewise experience bothersome temperature control choices.

Handbook Mixer: The hose pipe and also spray of a manual mixer shower device are a part of the wall system and also the cold and hot water products are linked to a solitary valve The temperature level and stress of the water are managed via either one or a variety of knobs (in much more expensive showers). Although temperature level control is much easier in hands-on mixer types, they are extra pricey than the previously discussed mixers. They likewise need extra plumbing of hot and cold supply of water pipelines.

Thermostatic Mixer: The tube and spray of this shower kind are a part of the wall system and also the hot and cold water materials are linked to a solitary shutoff below also. It is full with a built-in stabiliser to self-adjust the water temperature level and also to avoid it from becoming also hot. Among the largest benefits of a thermostatic mixer shower type consists of convenient temperature level control. However, it is one of the most expensive of the different mixer choices.

Power Shower: A power shower is a solitary device consisting of an effective electrical pump that is capable of changing both the water stress as well as temperature level. This type of shower can be fitted if there is water system from a cold water cistern as well as a warm water cyndrical tube. A power shower makes the modification of both stress as well as temperature simple. On the other hand, it is unsuitable for water heated directly by the shower or where the water is supplied by a mix central heating boiler under mains pressure.

Electric Shower: An electric shower is plumbed right into a keys cold water supply as well as it heats the water electrically. It is essential to note that for this shower kind to be mounted, the mains stress needs to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The unit allows the temperature and also pressure to be changed via a knob. Versions with temperature stabilisers are better as they remain unaffected by various other faucets somewhere else in use within the house. A significant downside of electrical showers is that the control knob just permits the alternative of high temperatures at less pressure, or lower temperatures at a higher pressure. This is problematic in the winter season when the spray is commonly weak and also the keys water is chillier. Nevertheless, this issue is taken on in some versions which are offered with a winter/summer setting.

Method

Depending on the type of shower you desire to set up, the shower head should either be fitted in order to avoid its contact with the water in the bathroom below or the base tray, or it has to have a check valve.
Before starting, it is recommended to mark the placements of the shower head and also control, as well as to prepare the pipe-work involved. Additionally, the water drainage system to eliminate the waste water will need to be intended. Both settings of the cable television route and the shower button will additionally need to be considered if a rapid or electric shower system is being installed.
Make use of the instruction overview provided with the shower device to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is very important to cut off the water system. In order to protect the pipelines, they should be given a water-proof covering and likewise fitted with separating shutoffs. The pipelines can then be buried into the wall and plastered over to neaten the general appearance.
Fit the base tray, shower head, as well as installations.
Attach the major shower control to the pipes that will be supplying the water (This may need a female screw thread adapter).
Reconnect the water supply and test the pipes for any leaks, as some may need tightening up.
If you are setting up an electric shower, bear in mind to turn off the electricity supply prior to making any kind of electrical connections. As soon as these links have been made (there should be assistance within the instruction manual), the power supply can be switched back on.

Readjusting Water Pressure to Suit Your Shower

The cold water tank can be lifted to a better height (sometimes as little as 150mm (6inches)) by installation a strong wood support underneath it - possibly composed of struts as well as blockboards. If you select this option, the major as well as circulation pipes will additionally have to be increased to fulfill the brand-new height of the storage tank.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it needs to be attached into the power supply in order to operate.

Piping as well as Drainage

It is best to utilize 15mm diameter supply pipelines, and also make the go to the shower as short and straight as feasible so as to maintain optimal stress as well as reduce heat loss. Additionally, by minimising using joints for pipeline edges, you can reduce the resistance in the flow of the water system. You can accomplish this by bending the pipelines rather.

A Lot Of Typical Mistakes

Breaking or ignoring neighborhood code constraints.

Using pipelines that are as well small.

Affixing copper to galvanized without utilizing a brass or dielectric suitable in between the two.

Not utilizing tape or pipeline substance at threaded joints.

Uneven your components when mounting them.

Not mounting an air space filling up for fixtures.

Cutting supply stub outs too brief to mount the shutoff valves onto after the completed wall surface remains in location.

Not appropriately lining up tubing into fittings or stop shutoffs. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will certainly create a leakage.).

When turning the water back on in your house, constantly run the outdoors pipe valve or flush your commodes to bleed dirt as well as air from the lines. This debris can cause troubles in your sink taps and various other plumbing trim.

How Do You Install a Shower? Follow This Guide

Installing a Shower at a Glance

Tools & Materials: Level, electric drill, caulk, hole saw, cedar shims, shower unit

Step 1: Drill pilot holes

Step 2: Prep fixture holes

Step 3: Move unit into place

Step 4: Caulk corners and base

Step 5: Attach door

Step 6: Install shower pan

Whenever plumbing is involved in a DIY project, people worry about what might go wrong. The truth is that installing a shower isn’t that complicated, and you can save a lot of money by doing it yourself. You shouldn’t need to make any alterations to your plumbing to complete the job, and most of the tools you need will be provided in your new shower kit.

Can I Install a Shower Myself?

Even if you’ve never installed a shower before, you’ll find this to be a project that is perfectly suited for DIYers with a moderate level of experience. Whether you're doing a bathtub conversion or installing a new stall, most of what you need comes in shower kits that you can purchase from a hardware store. The first thing you need to do is determine what type of shower stall you want.

Single-panel stalls are the easiest to install because they come preassembled. All you need to do is put them in place. Multi-panel showers require a few additional steps, but you’ve got more control over the appearance of your unit. Multi-panel units are also much easier to handle if you’re going to do the installation without any help.

Be sure to take all appropriate safety precautions, such as wearing eye protection and gloves. When you’re removing or installing a shower unit, you might kick up debris that could hurt your eyes. You’ll also need to work with equipment that will get extremely hot, so be sure to have safety gloves handy.

Tools and Materials

2- to 4-foot level

Electric drill with a 1/8-inch drill bit

Caulk

2-inch hole saw

Cedar shims

The unit itself

Before You Begin: Prep the Space

It’s highly important to measure your space accurately before putting the stall in. Measuring from the floor upward and from each corner outward will ensure you’ve got the right measurements. What you’re looking for is where the plumbing apparatuses are going to come through the stall. Transfer these measurements over to the back of your unit by drawing the locations of these holes using a pencil or marker.

Pull out your old shower and make sure to scrape off all the old caulking. Be thorough because you want to work with smooth surfaces for the best installation. Once you’ve pulled out your existing shower, you need to make sure that the floor is clean and dry. The best way to clean debris is with a shop vacuum, as it’ll soak up water and dirt together.

If you’re experiencing any plumbing issues, such as low water pressure, this is a perfect opportunity to solve them. Make sure that the pipes themselves are not in need of patching and clean your showerhead. When you turn the water back on after your project, check the pipes for signs of wear or disrepair. Anything beyond minor repairs should be handled by a plumber, and this is the best time to bring in a professional.

If the floor has any moisture at all, don’t proceed until it’s completely dry. The last thing you need is for the floor to rot or invite mold and mildew into your base. Once everything is dry, apply waterproof wallboard to the walls. This can be attached with screws or nails, then sealed with caulk so that water doesn’t seep into any crevices.

https://www.homeserve.com/en-us/blog/how-to/install-shower/

I have been very drawn to How to Install a Direct-to-Stud Shower Enclosure and I hope you enjoyed reading the blog post. Liked our post? Please share it. Help other people locate it. I thank you for reading our article about How to Install a Direct-to-Stud Shower Enclosure.

Free Quote

Report this page